Stuffing Box

         In the bore for the piston rod in the bottom of the scavenge air box a stuffing box is mounted to prevent lubricating oil from being drawn up the crankcase into the scavengeing air space. The stuffing box also prevents scavenge air from leaking into the crankcase.

The stuffing box is mounted on a ring which is bolted onto the underside of the scavenge air box. The stuffing box is taken out together with the piston rod during overhaul of the piston, but also can be disassembled for inspection in the crankcase with the piston remaining in position.

The stuffing box housing is in two parts, assembled by a flanged joint. In the housing five ring grooves have been machined out of which the two uppermost ones accommodate sealing rings that prevent scavenge air from blowing down along the piston rod. In the lowermost grooves scraper rings are fitted which scrape the lubricating oil of the piston rod. The oil is led through bores in the housing and back to the crankcase.

Between the two uppermost ring grooves, for the sealing rings, and the three lowermost grooves, for the scraper rings, a cofferdam has been machined out which, through a bore in the housing and a connecting pipe, communicates with a control cock on the outside of the engine. It can be checked by opening this control cock that the scraper and sealing rings are functioning correctly.

Sealing ring section

The two sealing rings each consist of a four piece brass ring which accommodates eight brass sealing segments, two per base, guided by four cylindrical pins. The parts are pressed onto the piston rod by a helical garter spring.

Scrapper ring section

The three scraper rings are made up of three steel base parts into which two lamellas are fitted into a grooves machined in each part. A garter spring keeps the ring in contact with the piston rod. Scraped off oil is led through ports in the base ring back to the sump.